Haitian 2800 ton Injection Molding Machine

Model: HTF2800X


- Screw diameter: 200 mm

- Injection volume: 35,154 cm3

- Injection weight: 31,990 gm

- Injection pressure: 137 MPA

- Injection stroke: 1,120 mm

- Screw speed: 0 , 50/5 r/min

- Heating input power: 171.



For more details on Haitian 2800 ton Injection Molding Machine click here

1763 US Ton Mitsubishi Injection Molding

Model: 1600MMIIIW-370


- Tie bar spacing: 63" x 70.86"

- Platen size: 96.46" x 88.58"

- Daylight: 125.98"

- Clamp stroke: 94.49"

- Mold thickness: 31.5" x 59"

- Machine was equipped wiith 326 oz, Barrel may have been changed to 120 mm, needs verification.



For more details on 1763 US Ton Mitsubishi Injection Molding click here

1950 US Ton Toshiba Injection Molding Machine

Model: IS1800DF-81AT


- Shot size: 140 oz. (PS)

- Tie bar spacing: 70" x 62"

- Platen size: 96" x 85"

- Daylight: 98" / 126" (Min / Max)

- Clamp stroke: 94" / 67"(Max / Normal)

- Mold tthickness: 59" / 31"



- Injectvisor V3.



For more details on 1950 US Ton Toshiba Injection Molding Machine click here

1980 Ton Toshiba Injection Molding Machine

Model: ISF1950DSII-200A


- Shot size: 384 oz.

- Tie bar spacing: 70.3" x 58.5"

- Platen size: 96.5" x 84.6"

- Daylight: 98.4-126"/31.5-59.1"

- Clamp stroke: 66.9"/94.5"



Equipped wwith:

- SII Controls

- Hydraulic K.



For more details on 1980 Ton Toshiba Injection Molding Machine click here

2350 Ton Husky Quadloc Injection Molding Machine

Model: QD2350MMCRS185/185


- Shot size: 734 oz.

- Tie bar spacing: 79" x 64"

- Platen size: 96.45" x 112.20"

- Daylight: 169.25"



Equipped with:

- Polaris control

- 460 volt



For more details on 2350 Ton Husky Quadloc Injection Molding Machine click here

3300 US Ton Mitsubishi Injection Molding

Model: 3000MM lll 0"


- Tie Bar Spacing: 78.74"x70.87"(H x V)

- Platen Size: 100.39"x96.46"(H x V)

- Daylight: 145.67" Max Volt

- Clamp Stroke: 106.3"

- Mold Thickness: 39.37"/ 74.80"

- Mit



For more details on 3300 US Ton Mitsubishi Injection Molding click here

2400 ton Injection Molding Machine

We are looking for 2400 ton Injection Molding Machine with following specification:


- Maximum acceptable age of the machine: about 20 years

- Preferred Brands: European Brands like KM, Engel,

- Pla



For more details on 2400 ton Injection Molding Machine click here

1450 US Ton Toshiba Injection Molding Machine

Model: IS1300DGW-110B


- Shot size: 251 oz. (PS)

- Tie bar spacing: 55.7" x 55.7"

- Platen size: 78" x 78"

- Daylight: 78.7"/ 98"

- Clamp stroke: 70.8" / 51"(Max / Normal)

- Mold thickness: 227.



For more details on 1450 US Ton Toshiba Injection Molding Machine click here

1430 US Ton JSW Injection Molding Machine

Model: J1300EIIIW

- Shot size: 210 oz.(PS)

- Tie bar spacing: 55" x 55"

- Platen size: 78.7" H x 79.5" V

- Daylight: 110" (Max)

- Mold thickness: 25" / 51"

- Double toggle clamp

- L



For more details on 1430 US Ton JSW Injection Molding Machine click here

1750 US Ton Toshiba Injection Molding Machine

Model: IS1600DFW-150B


- Shot size: 343 oz. (PS)

- Tie bar spacing: 70.8" x 59"

- Platen size: 96" x 84.6"

- Daylight: 98"/ 126"(Min / Max)

- Clamp stroke: 94" x 67"(Max / Normal)

- Moold thickness: 31.



For more details on 1750 US Ton Toshiba Injection Molding Machine click here

3500 Ton, 600 Oz. HPM Injection Molding Machine

Model: H3500EP


- Platen size: 108.00" x 120.00"

- Distance between tie bars: 84.00" x 72.00"

- Min daylight: 85/65/53"

- Max daylight: 160/140/128"

- Ejector stroke: 9"

- Clamp stroke: 75"

- Dimensions: 759"Lx162"Wx168"H

- Weight: 607,000 lbs

- Equipped with

- Allen bradley PLC5 Control

- 600 Oz.



For more details on 3500 Ton, 600 Oz. HPM Injection Molding Machine click here

2300 ton Injection Molding Machine

We are looking for 2300 ton injection molding machine with following specification:
- Upto 5000 hours of usage
- Prefer Brands: German like Krauss Maffei


For more details on 2300 ton Injection Molding Machine click here

Chuan Lih Fa CLF - 1600 ton Plastic Injection Molding Machine

Model: 1995
- Screw diameter: 130 mm
- Distance between tie bar: 1520 x 1400 mm
- Platen size: 2200 x 2100 mm
- Motor: 130 KW
- Heater: 70 KW
- Opening: 1500 mm
- Shot weight: 8.700 kg

For more details on Chuan Lih Fa CLF - 1600 ton Plastic Injection Molding Machine click here

2000 Ton Injection Molding Machine

We are looking for 2000 ton injection molding machine with following specification:
- Distance between tie bars: 1850 x 1600
- Min mould height: 690
- Max mould height: 1590
- Daylight: 3490
- Pl

For more details on 2000 Ton Injection Molding Machine click here

1600 ton Husky, Engel, Krauss Maffei Injection Molding Machine

We are looking for 1600 ton Husky, Engel, Krauss Maffei moulding machine with the following specification:
- Shot Weight: 6 to 8 kg
- Age less then 12 year

For more details on 1600 ton Husky, Engel, Krauss Maffei Injection Molding Machine click here

1500 to 1800 ton Injection Molding Machine

We are looking for 1500 to 1800 ton Injection Molding Machine with following specification

- Shot weight: 6 lbs. PA6
- 2 core pull circuits on moving and stationary side minimum
- Age (newer than

For more details on 1500 to 1800 ton Injection Molding Machine click here

UBE 3000 Ton Injection Molding Machine

- Shot weight: 25 kg
- Shot 400 Plus 170 OZS
- Platens: 125 x 110.0"
- Controls: 90 CC
- Tie rods: 18.0"
- Screw size: ET-1
- Star robot Model: TW-2000-VM
- Quick mold changer
- Unloadinng conveying system
- Tie bar clearance: 84.

For more details on UBE 3000 Ton Injection Molding Machine click here

2000 Ton Husky Injection Molding Machine

Model: Husky EWLL2000-RS, 200 175, SMC
- Distance between the tie bars - 1,500 x 2,200 mm
- Max. Mould opening stroke: 3,200 mm
- Minimum mould height: 1,000 mm
- Maximum mould height: 2,500 mmm
- Screw diameter: 175 mm
- Ejector stroke: 350 mm
- Injection shot volume: 21,888 cc
- Injection shot weight: 15978 PP (gms)
- Working hours: 40,410 hr.

For more details on 2000 Ton Husky Injection Molding Machine click here

3000 ton Injection Molding Machine for Pallets

We are looking for 3000 t0n injection Molding Machine with following specification:

- 25 kg shot weight
- For pallets
- Machine should have servo motors


For more details on 3000 ton Injection Molding Machine for Pallets click here

Mitsubishi 1450 ton Injection Molding Machine

Model: 240
- Screw diameter: 120 mm
- Theoretical injection capacity: 6,780 cm3
- Injection mass Polystyrene (PS): 6,240 g
- Injection mass Polyethylene (PE): 5,020 g
- Maximum injection presssure MPA (kgf / cm2): 177 (1,800)
- Maximum holding pressure MPA (kgf / cm2): 147 (1,500)
- Injection speed: 125 mm/sec
- Injection rate: 1,415 cm3/sec
- Plasticizing capacity (PS): 505 kg/h
- Screw RPM: 131 RPM
- Nozzle touch force KN (tonf): 59 (6.

For more details on Mitsubishi 1450 ton Injection Molding Machine click here

Husky 2000 ton Injection Molding Machine

Model: Husky EL
- Euromap: RS 185 / 175
- Screw diameter: 175 mm
- Shot weight (P/S): 18,766 gram
- Calculated injection: 19,964 cm 3
- Injection pressure: 1,788 BAR
- Platen sizes: 2,690 X 2,2990 mm
- D.

For more details on Husky 2000 ton Injection Molding Machine click here

Husky 2350 ton Injection Molding Machine

Model: QD2350 MMC RS185/185
- Shot size oz.: 734
- Shot size grams: 20808.533
- Tie bar spacing: 79" x 64"
- Platen size: 96.45" x 112.20"
- Daylight: 169.25
- Clamp type: Hydraulic
- Co

For more details on Husky 2350 ton Injection Molding Machine click here

Toshiba 1800 Ton Injection Molding Machine

Mitsubishi Model: 1800MMW-240
- Max. injection force: 1640 Kg/cm2
- Screw diameter: 120 mm
- Theoretical inject. quantity: 6780 gr
- Inject quantity (PS): 6240 gr
- Inject quantity (PE): 5020 grr
- Max.

For more details on Toshiba 1800 Ton Injection Molding Machine click here

Battenfeld 3300 ton Injection Moulding Machine

- Type of machine: BA 33000 - 19000 HM
- Control version: Unilog 9000 Degree
- Screen text: German
- Operating hours: 82607 h

Technical details
- Size of mould platens (h x v): 3150 mm x 27000 mm
- Distance between tie bars (h x v): 2240 mm x 1800 mm
- Mould opening stroke: 2200 mm
- Mould height min.

For more details on Battenfeld 3300 ton Injection Moulding Machine click here

Krauss Maffei 2300 ton Injection Molding Machine

Model: KM 2300 - 25000 MC
- Control version: MC 3 - F
- Screen text: German / French
- Operating hours: 94,000 h

Technical details
- Clamping force: 23,000 KN
- Mould opening force, max.: 1692 KN
- Travel force movable platen Opening: 201 KN
- Travel force movable platen closing: 193 KN
- Size of mould platens (h x v): 2830 mm x 2460 mm
- Distance between tie bars (h x v): 2000 mm x 1600 mm
- Mould opening stroke: 2600 mm
- Mould height min.

For more details on Krauss Maffei 2300 ton Injection Molding Machine click here

Ferrocare Windsor 1300 ton Injection Molding Machine

- No of Barrel: 2
- Screw Diameter: 115
- Shot weight: 6900 cm3
- L/D: 10
- Dimension locking unit: 9.3 M x 3.2 M
- Dimension Injection unit: 6.8 M x 4.2 M
- Machine weight: 118 Tons
- Connec

For more details on Ferrocare Windsor 1300 ton Injection Molding Machine click here

Krauss Maffei 1600 ton Injection Molding Machine

Model: Krauss Maffei 1600/8000/8000/ML
- No of Barrel: 2
- Screw Diameter: 115
- Shot wt: 7000 cm3
- L/D: 12
- Dimension locking unit: 9.2 M x 4.8 M
- Dimension Injection unit: 9.8 M x 3.3 M
-

For more details on Krauss Maffei 1600 ton Injection Molding Machine click here

Chuan-Lih-Fa 2200 ton Injection Moulding Machine

Model: CLF-2200 T
- Shot Size: 264 oz
- Platen dimensions: 108" x 104"
- Distance between tie bar: 72" x 68"
- Mold height Min./Max: 28" / 68"
- Die opening stroke: 48"
- Equipped with
- HKO
-

For more details on Chuan-Lih-Fa 2200 ton Injection Moulding Machine click here

Husky 2150 ton Injection Moulding Machine

- Clearance between tie bars (hxw): 2000 x 1600 mm
- Platen measure (hxw): 2890 x 2420 mm
- Mould height min/max: 1000 x 2000 mm
- Opening stroke: 1900 mm
- Screw dimension: 155 mm
- Plasticize

For more details on Husky 2150 ton Injection Moulding Machine click here

Krauss Maffei KM 2700 Injection Moulder

Model: KM 2700
- The machine is fitted with a 30,000 kN clamping force.
- The injection moulder was operating in a mould making company in Germany and
was used for bumper and dashboard mould trialss and tests.

For more details on Krauss Maffei KM 2700 Injection Moulder click here

4000 Ton Engel Injection Molding Machine

- Shot size: 400 ozs.
- Platen: 130 x 116"
- Tiebar clearance: 88 x 75"
- Age: 1997-1998
- Controls CC-90
- Complete with Star robot model # TW-2000 BM and Quick mould changer, unloading conveyor

For more details on 4000 Ton Engel Injection Molding Machine click here

Injection Moulding Machine

We are looking for 4000 to 6000, preferably 5000, Injection Moulding Machine With the following specification:
- Tonnage of machine: between 4000 to 6000, preferably 5000,
- Max. accept. age: from 11990 up to day
- Brands: European Brands, American Brands, like as Battenfeld, Krauss Maffei, Demag, Engel, Winsor, Netstal
- City of delivery if its price and quality would be acceptable, the city of delivery is not very important
- Platen size: 1800 mm
- It is better to equipped with Robot
- Budget: regarding to its quality, we know its price
- Note: since 2000 to 2010, we imported about 600 units of Mold Injection Machines, from different size of 20T to 3200T clamping force, we sold the best parts of them to our clients, there are some of them in our factory, we hope to renew this business again.

For more details on Injection Moulding Machine click here

Italtech 3000 Ton Injection Molding Machine for Pallets

Italtec MSK 3000/19300 WP
- Built in 2000
- Improved in 2006
- Control SYSCOM 1000 new in 2006
- Clamping force: 3.000 tons
- Platen size: 3.310 x 2.880 mm
- Tie-bar-distance: 2.240 x 1.800 mm

- Mould thickness: 650 x 2.

For more details on Italtech 3000 Ton Injection Molding Machine for Pallets click here

Krauss Maffei 3000 ton Injection Moulding Machine

Type: KM 3000 – 25000A
- Controller: MC3
- Tie bar space: 2200 x 1700 mm
- Shutheight min/max: 1480/ 2100 mm
- Stroke: 4200 mm
- Screw: 160 mm
- Shot size: 14000 ccm

Options:
- 4x cores
-

For more details on Krauss Maffei 3000 ton Injection Moulding Machine click here